How To Sew Cuffs On Pants

Updated on September 15, 2022 by Sarina Tariq

A cuff is an extra band of textile stitched to the hem and then turned up – then it acts as an embellishment and adds an extra bit of interest to your pants. Ordinarily, cuffs have a casual vibe which is very bonny.

It is also an like shooting fish in a barrel fashion to add together a few inches to the length of the pants.

How to sew Cuffs to the hem of your pants

This assumes that you have a fix-made pant already with you (and not sewing information technology from the scratch). If y'all are sewing the pants from scratch, But increase the length of the pants and turn the hem up for your cuffed pant hem, like the picture show beneath.

An extra wide hem is stitched. The extra hem is turned up and acme stitched at the side seams.

If the fabric has a double side (unlike colour on the inside this can be used for a contrasting effect)

How to sew a seperate Pant cuff

First and foremost you have to get rid of the hemstitching – open up up the hem stitching with a seam ripper. Decide on the length yous desire for the pants. Do you want the extra length you will get, by retaining the extra length at the hem? If not cut information technology off, leaving just one/4 inch equally seam assart. If you desire extra length you can retain the hem – just let out the stitches with a seam ripper.

Determine on your cuff fabric. Decide on the gage width you lot desire.

Length of the cuff fabric = width of the pant leg across the bottom plus 1/2 inch seam assart.

Width of the fabric of the gage textile = Double your cuff width and and so add 1/2 inch to this – this is because you will be be folding the material by one-half. Measure the width of the pant leg hem equally well. Add i/two inch to this. This is the length of the fabric strip you lot should cutting. For pocket-sized kids a width of 3.5 inches is all you need.

Marking and Cut this measurement from your gage material.

If yous accept a tapered pant with a narrow hem, Mirror the pattern of the hem border exactly

Press the seam allowance of the pant leg open up.

Take the cuff fabric – Stitch the brusque edges together.

Press the seam assart open. Y'all have this tube now. Plough information technology rightside out.

Fold information technology by the middle so that it looks similar this.

Bring the pants within out.

Insert the pant leg through the cuff y'all have made.

Align the cuff cloth edge and the pant leg edge. Pin it.

Sew the edges together with a i/4 inch seam allowance.

Now turn the pant right side out. Fold the cuff to the outside.

At this point, brand a small-scale tack run up on the inside along the fold of the cuff to keep information technology anchored. Do it on both sides. You might want to brand it a piffling (ane/4 of 1/2 inch) below the top border of the cuff and so that it is non visible from the outside.

An easy method is to add together a faux-fabric cuff is to stitch an actress textile to the within of the leg; stitch information technology to the within of the hem – this way when the leg is folded up the textile inside volition wait as if it is a cuff. Refer the picture given below.

Related posts : How to shorten a jeans hem; How to alter the hem of pants;  twenty Different types of pants; Names of dissimilar hemlines; How to sew a hem – 20 methods to sew hem with sewing machine ; 18 methods to stitch hem by manus; Invisible hem – 4 methods.

Source: https://sewguide.com/how-to-sew-pant-cuff/

Share this post